Use of fingerprint access control system in forklifts and handling equipment

Features and benefits
● Fingerprint access controller is a traditional way to replace the key, password, IC card, and proximity card with fingerprints to control the door lock security controller for access control personnel.
● Replace fingerprinting with traditional personal identification methods, which will not be forgotten, unforgeable, not damaged, not easily stolen, never lost, and provide you with the most secure access control.
● Compare mode 1:1 or 1:N or choose.
● There is no need to configure the card issuing machine, key card (magnetic card, IC card, proximity card, etc.), no loss or damage to the key card, no maintenance cost, and excellent cost performance.
● It has three levels of management authority setting function: it is divided into main manager, sub-manager and ordinary user. The main manager has the full authority of the access control system; the secondary manager can set some functions of the fingerprint access controller; ordinary users can only check the fingerprint opening. Fully guarantee the management security of the access control system.
● The door opening logic can be set to "one person opens the door" or "two people open the door" or "three people open the door". That is, one person can check the fingerprint to open the door; or two people can check the fingerprint at the same time to open the door; or three people can check the fingerprint to open the door. Meet the need for access control in high security areas.
● Each user can set a valid period of use. For example, the effective period of use of a user can be set from April 1, 2002 to May 1, 2002, and cannot be used before or after. Meet the management of the user's life.
● It can set the daily effective use period of different user groups. For example, a group of users can only be used from 8:30 am to 5:30 pm every day, and other time periods are not allowed. Meet the daily effective usage time management of users.
● The fingerprint lock normally open function can be set when special needs are needed. When the special requirements such as handling equipment and personnel are in and out, the fingerprint access control system can be set to maintain the normally open state for a certain period of time to meet the needs of special occasions.
● Illegal door opening alarm---When the door is opened by illegal means, the system outputs an illegal door opening alarm signal, which can be connected to an alarm or alarm system to ensure the security of the door at any time.
● Power failure alarm: When the fingerprint access controller is powered off, the system outputs a power failure alarm signal, which can be connected to an alarm or alarm system to ensure the security of the access control at any time.
● The internal memory of the access controller automatically records the system management and the log records used in the door and exit. The 80,000 entry and exit records can be directly queried on the fingerprint access controller.
● When using a single unit, connect the computer and printer through Ethernet or R485 network, and read the system management record and access record stored by the fingerprint access controller into the computer for saving or printing.
● When the fingerprint access controller is connected to multiple networks via Ethernet or RS485 network, the computer can monitor and control the entry and exit status, door status, lock status and alarm status of each fingerprint access control in real time, and automatically record and save the monitoring data.
● With Chinese and English language environment selection function, international product design. Fingerprint access control FG100-A